10/100M Fast Ethernet 1 FE SFP port & 1 RJ45 port SFP Media Converter
}else{?>
This SFP Media Converter is an Ethernet media converter that converts media transmission between UTP Copper cables and fiber SFP (Small Form-Factor Pluggable) transceivers.
This series SFP media converters are designed to meet the massive needs for Ethernet network deployment and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 120km.
The series SFP media converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a Standard Converter Chassis. The installation & operation procedures are simple & straight forward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.
Features
- Conversion between different transmission speeds and media types
- Standalone and compact hardware design
- Auto-negotiating Ethernet port (Half/Full Duplex)
- Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
- Plug-and-Play installation
- Built-in Link Loss Forwarding Technology
- Easy Installation, Easy Trouble shooting
Specifications
-
Standard Compliance
- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX
- IEEE 802.3z 100Base- SX/LX standards
- IEEE802.3x Flow Control and Back pressure
-
Connector and Interface
- Fiber: FE SFP
- Copper: RJ45 (10/100Mbps)
- MDI/MDI-X and Auto-Negotiation Function Support
- LED Indication: FEF,SPD,FX-LINK,TX-LINK,PWR,FDX
- Power: External power supply
- Dimension: 95 ×70 ×26mm(out) power external
Link Loose Forward
- TX to Fiber: If TX port link is broken, then the media converter will force the fiber to link down.
- Fiber to TX: If Fiber port link is broken,the media converter will force the TX port to link down.
DIP Switch
- DIP Switch 1: Fiber Auto-Negotiation/100Mbps FulDuplex mode
- DIP Switch 2: TX to Fiber LLF (Link LoseForwarding) Disable/Enable
- DIP Switch 3: Fiber to TX LLF (Link LoseForwarding) Disable/Enable
Operation Environment
- Operating temperature: 0°C ~ 70°C
- Storage temperature: -40°C~ 85°C
- Operating humidity: 10% ~ 90%, non-condensing
The 10/100 Fast Ethernet Media Converter supports industry standard FE SFPs.